Home / Products / Wood-based Panel / Plywood / Content

Products

maple plywood

Due to the tight, consistent grain of Maple, it finishes extremely well. Sanding or scraping provides an extremely smooth surface, without the need of using grain fillers. Stains applied to the plywood provide extremely even color, unlike woods with a more pronounced grain pattern. Maple plywood is very strong and is durable for use.

Send Inquiry

Fast Delievery
Quality Assurance
24/7 Customer Service

Product Introduction

Maple Plywood 4x8 ft Plywood

Products Description

Maple plywood is made from multiple layers of fine-grained maple and has a wide range of applications and specific advantages. Maple wood possesses a clear, angular grain and is free from defects such as insect eyes, cracks and breaks. After harvesting, the logs are primed, graded, and cut into appropriate lengths and widths for the next step in the process. Maple plywood has interlocking grain, fine and even structure, uniform color and no scarring. Its beautiful grain and color make maple plywood visually appealing and can add unique aesthetics to interior decorations.Maple plywood has good processing performance, easy to process into a variety of shapes, while the paint coating performance is good, strong adhesive, strong nail holding power. These characteristics make the furniture made of maple plywood strong, sturdy, durable, with a long service life.Maple plywood is not only produced in unlimited places, but also has the characteristics of resistance to cracking, shrinkage, twisting/warping, and usually has high strength, which is an environmentally friendly and practical alternative to ordinary wood, it is an environmentally friendly and practical material.

Our maple plywood is available in a variety of thicknesses so you can meet any of your woodworking needs.

Products parameters

Product Name:	Maple Plywood
F&B :	Maple Veneer
Grade:	C/D Grade
Core:	Poplar Core, Veneer, Combi Core, MDF
Glue:	E1/ E0 / CARB P2 Glue
Thickness:	5-25mm
Specifications:	2440*1220mm
Moisture content	<=14%
Thickness tolerance	From +/-0.3mm To +/-0.5mm
Veneer Thickness	0.17mm-0.35mm
Finish	UV, laminate, Painting, Stain

Product Picture

15 mm. x 4 ft. x 8 ft
Hardwood plywood
Smooth and glossy finish
Strong and resistant to damage

Applications:

Cabinets, Case goods, End Panels, Store Fixtures, Furniture, Shelving, Entertainment Centers

Details of maple plywood production process

1. Maple Harvesting and Primary Processing
The production of maple plywood first need to choose high-quality maple raw materials. Maple should have clear grain, obvious angle, no bug eyes, cracks, damage and other defects. After harvesting, the logs are first processed, graded and cut into appropriate lengths and widths for the next step of processing.
2. Drying
After the primary processing of the maple wood for drying. Generally a drying kiln is used so that the water in the wood gradually evaporates to reach a stable moisture content for subsequent processing. The drying process can be controlled for at least 2 months, the longer the time to make the plywood quality is better, but the cost will also increase accordingly.
3. Finishing
After drying the maple wood will sometimes appear bent or twisted phenomenon, need to be trimmed to ensure that the flatness and size of each piece of wood is consistent. This process is important because the quality of plywood is limited by the condition of each piece of wood.
4. Cutting
After trimming the wood and then cutting process, according to the board needs to be cut into a number of thin boards. Currently CNC equipment is used for cutting to ensure the quality of each panel.
5. Lamination
The pre-prepared wood is assembled together to form the required size and quantity, the veneer is de-angled and flattened, and then brushed with glue on the surface of the board, and the boards are pressed together one by one, to facilitate the production of hollow plates such as translucent steel or aluminum.
6. Pressing
Laminating good maple boards after a specific temperature for a number of heavy pressure to produce a greater pressure, so that the glue to give full play to its role, will be a single piece of wood completely bonded to the end of the material.
7. Sanding
The pressed boards need to be sanded to make the surface smooth and flawless.
8. Painting
The last step is to paint the plywood. Wooden board paint treatment can be achieved to protect the surface of the wood or hollow metal plate at the same time, so that it has a beautiful appearance effect.